Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

LMS 4.0 - NVRAM state

Hi,

I want to poll and verify the state of NVRAM in C6509 devices.

Because the issue of "Configuration lost" after device reloads were observed.

I thought of proactively monitoring the state of device NVRAM.

Which MIB and OID will help me in monitoring the state of NVRAM?

Rajmohan R
Everyone's tags (1)
4 REPLIES
Cisco Employee

LMS 4.0 - NVRAM state

Hi Raj,

1.3.6.1.4.1.9.5.1.1.67

sysStatus OBJECT-TYPE

SYNTAX INTEGER {
other(1), -- none of the following
ok(2), -- status ok
minorFault(3), -- minor problem
majorFault(4) -- major problem }

MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational status of the system."
::= { systemGrp 67 }

I just test this OID , it is working..

I hope this will help

Thanks
Afroz
Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

LMS 4.0 - NVRAM state

Hi Afroj,

When checked with MIB browser on C6509, i got "ok" as response.

Is this response indicates the overall system status or only the status of  NVRAM.

Rajmohan R
Cisco Employee

LMS 4.0 - NVRAM state

Hi Raj,

This is The operational status of the system. I mean "over all System status.

Thanks
afroj
Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

LMS 4.0 - NVRAM state

Thanks Ahmad for the clarification.

However, is it possible to poll and check only the state of NVARM in C6509?

Rajmohan R
263
Views
0
Helpful
4
Replies