Promelit, Marconi/Selex -MPS 115, Ericsson MD 110, Philips Sopho IS 3000, NEC PASOLINK MX, RAD ASMI-52 are not in LMS 4.0 supported device table. I ask, if there is any way to monitor these devices using LMS 4.0?
Only in a very very limited fashion. 99% of LMS customers don't even go to the trouble since only very general features (no fault management, no inventory management, no software management, etc.) are available for non-Cisco devices.
LMS is really designed to be a Cisco network management system. A multi-vendor network is better managed with a third party solution (e.g. Solarwinds Orion NPM, IPSwitch What's Up Gold, Nagios, Cacti, etc.)
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...