If yes, it means that you have a problem for the file transfer... I would suggest to debug like this : 1) Check the credentials (Inventory->Job Browser->Device Credential Verification Jobs, then create a new one)
2) Is it possible to do a tftp from the device to the LMS ? (If the config is done by tftp)
Create a tmp file on /tftpboot on LMS
Copy the startup or running file from the device to the LMS with the name of your tmp file (it is not allowed to create a file on the LMS with TFTP)
3) Do a sniffing of the traffic between the LMS and the device in order to see what happen
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.