Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 4.1 softwer distribution

Hi,

We tried to distribute the softwer ( 12.4.23 ) via LMS 4.1 but we got the following message:

"""

Device is locked for exclusive access.

The supported protocols for image transfer are: TFTP

SWIM1001: The input parameters to the Image Distribution/Image Import/Image Activate are invalid.

You may have used incorrect Device Data for this task.

Check the application log file for more details.

Device is unlocked.

Device Upgrade Result : Failed

End Time:Mon Mar 05 15:53:17 CET 2012

"""

------------------------------

Earlier we used LMS 3.2 and it gave same messages!

The hardver is cisco 2620XM and actually used IOS is

c2600-advipservicesk9-mz.124-3.bin

------------------

We need to upgrade large number of devices via LMS.

Regards

4 REPLIES
Silver

LMS 4.1 softwer distribution

Hi,

You can try deleting the image from your repository and then re-adding it.  If this does not correct the problem then please try deleting the device from LMS and then re-adding it.  However if the issue persists, the job logs will be helpful to further troubleshoot.  You can find them (Windows)  C:\PROGRA~1\CSCOpx\files\rme\jobs\swim\

Thanks

New Member

LMS 4.1 softwer distribution

Hi,

The lms 4.1 isbtrand newe install!

Therer are more than 1200 devices and i would not like to delete them.

I enclosed the jobs logs.

If nobody has idea i need to open TAC!

Regards,

New Member

LMS 4.1 softwer distribution

The job swim_debug.log shows

[ Mon Mar 05  15:53:08 CET 2012 ],INFO ,[RFRDOper:172.36.16.254],com.cisco.nm.xms.xdi.pkgs.LibSwim.flash.FlashPartition,operationStatusChange,320,FLASH_SQUEEZE : failed ,but updating flash partition as delete command may got succeded

[ Mon Mar 05  15:53:08 CET 2012 ],INFO ,[RFRDOper:172.36.16.254],com.cisco.nm.xms.xdi.pkgs.LibSwim.flash.FlashPartition,UpdateFlashPartition,208,Updating the flash partition "flash" after an erase/squeeze operation

[ Mon Mar 05  15:53:08 CET 2012 ],INFO ,[RFRDOper:172.36.16.254],com.cisco.nm.xms.xdi.pkgs.LibSwim.flash.FlashPartition,UpdateFlashPartition,211,Got source object as com.cisco.nm.xms.xdi.pkgs.LibSwim.flash.FlashSourceCFM@898b41

[ Mon Mar 05  15:53:08 CET 2012 ],ERROR,[RFRDOper:172.36.16.254],com.cisco.nm.xms.xdi.pkgs.SharedSwimIOS.RFRDistributionOper,run,385,Caught exceptionjava.lang.NumberFormatException: For input string: "NoSuchInstance"

    at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)

    at java.lang.Integer.parseInt(Integer.java:449)

    at java.lang.Integer.parseInt(Integer.java:499)

    at com.cisco.nm.xms.xdi.pkgs.LibSwim.flash.FlashPartition.UpdateFlashPartition(FlashPartition.java:216)

    at com.cisco.nm.xms.xdi.pkgs.LibSwim.flash.FlashPartition.operationStatusChange(FlashPartition.java:321)

    at com.cisco.nm.xms.xdi.pkgs.LibSwim.flash.FlashSourceCFM$OperationThread.run(FlashSourceCFM.java:1864)

    at com.cisco.nm.xms.xdi.pkgs.LibSwim.flash.FlashSourceCFM.squeeze(FlashSourceCFM.java:1070)

    at com.cisco.nm.xms.xdi.pkgs.LibSwim.flash.FlashPartition.squeeze(FlashPartition.java:543)

    at com.cisco.nm.xms.xdi.pkgs.SharedSwimIOS.RfrSwLoadOperation.performFlashCleanup(RfrSwLoadOperation.java:3491)

    at com.cisco.nm.xms.xdi.pkgs.SharedSwimIOS.RfrSwLoadOperation.performFlashCheckup(RfrSwLoadOperation.java:3249)

    at com.cisco.nm.xms.xdi.pkgs.SharedSwimIOS.RfrSwLoadOperation.run(RfrSwLoadOperation.java:1120)

    at com.cisco.nm.xms.xdi.pkgs.SharedSwimIOS.RfrSwLoadOperation.execute(RfrSwLoadOperation.java:366)

    at com.cisco.nm.xms.xdi.pkgs.SharedSwimIOS.RFRDistributionOper.run(RFRDistributionOper.java:374)

    at java.lang.Thread.run(Thread.java:662)

[ Mon Mar 05  15:53:08 CET 2012 ],ERROR,[RFRDOper:172.36.16.254],com.cisco.nm.xms.xdi.pkgs.SharedSwimIOS.RFRDistributionOper,run,388,Unable to Initiate an Image Copy Operation to Device

[ Mon Mar 05  15:53:08 CET 2012 ],INFO ,[RFRDOper:172.36.16.254],com.cisco.nm.xms.xdi.pkgs.SharedSwimIOS.RFRDistributionOper,updateStatus,343,updateStatus() protocolUsed

[ Mon Mar 05  15:53:08 CET 2012 ],INFO ,[RFRDOper:172.36.16.254],com.cisco.nm.xms.xdi.pkgs.SharedSwimIOS.RFRDistributionOper,updateStatus,346,Buff Msg:

[ Mon Mar 05  15:53:08 CET 2012 ],INFO ,[RFRDOper:172.36.16.254],com.cisco.nm.rmeng.swim.drivers.SoftwareOperationDriver,operationStatusChange,2000,DDriver :opStatusChnage got Operation Status : Op ID = 2364641593518593493, Error Code = 0, Error Info = Unable to Initiate a image distribution Operation, Error Detail = Check the input parameters, Percentage Completed = 0 , Status =  FAILURE, Operation Failed

[ Mon Mar 05  15:53:08 CET 2012 ],INFO ,[RFRDOper:172.36.16.254],com.cisco.nm.rmeng.swim.drivers.SoftwareOperationDriver,operationStatusChange,2001,Protcol used

[ Mon Mar 05  15:53:08 CET 2012 ],INFO ,[RFRDOper:172.36.16.254],com.cisco.nm.rmeng.swim.drivers.SoftwareOperationDriver,operationStatusChange,2010,OSC null

[ Mon Mar 05  15:53:08 CET 2012 ],INFO ,[RFRDOper:172.36.16.254],com.cisco.nm.rmeng.swim.drivers.SoftwareOperationDriver,operationStatusChange,2011,

[ Mon Mar 05  15:53:08 CET 2012 ],INFO ,[RFRDOper:172.36.16.254],com.cisco.nm.rmeng.swim.drivers.SoftwareOperationDriver,operationStatusChange,2018,OSC null

[ Mon Mar 05  15:53:08 CET 2012 ],INFO ,[RFRDOper:172.36.16.254],com.cisco.nm.xms.xdi.pkgs.SharedSwimIOS.RFRDistributionOper,updateStatus,343,updateStatus() protocolUsed

[ Mon Mar 05  15:53:08 CET 2012 ],INFO ,[RFRDOper:172.36.16.254],com.cisco.nm.xms.xdi.pkgs.SharedSwimIOS.RFRDistributionOper,updateStatus,346,Buff Msg: SWIM1001: The input parameters to the Image Distribution/Image Import/Image Activate are invalid.

     You may have used incorrect Device Data for this task.

     Check the application log file for more details.

Silver

LMS 4.1 softwer distribution

Hey,

I see in the logs you are upgrading to c2600-advipservicesk9-mz.124-23.bin but the only release I see available on CEC is c2600-advipservicesk9-mz.124-23a.bin.

Please verify that the image is valid and try again.  Let us know if you still run into any issues.

http://www.cisco.com/en/US/products/ps6350/prod_release_notes_list.html

Thanks

612
Views
0
Helpful
4
Replies
CreatePlease login to create content