Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

LMS 4.1 WS-C3550-24PWR-SMI and WS-C3550-24DC-SMI

               

Ciscoworks LMS 4.1 recommended IOS c3550-IPBASEK9-mz.122-55.SE5.bin as an option for upgrading my WS-3550-24PWR-SMI switch. Before reloading (after upgrading) I noticed this IOS version is not on the compatible list for my switch. Can I rerun software distribution with the correct IOS for my hardware without corrupting the flash with Ciscoworks? On a previous occasion I tried this but the flash became unreadable.

WS-3550-24PWR-SMI (Current device loaded with IOS 122-55.SE5.bin)

WS-3550-24DC-SMI    (Only device listed as being compatible with this IOS)

***My switch is over 500 miles from where I'm currently located****

Thank You,

Doug

Everyone's tags (2)
422
Views
0
Helpful
0
Replies
CreatePlease to create content