Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 4.2.1 Discovery IP instead of hostname

Hi,

we use LMS 4.2.1 and we noticed a strange behaviour when starting a discovery.  From aprox. 160 devices some devices are displayed as IP Address instead of hostname. Every device is DNS resolvable and has a value for "hostname"

I´ve tried every possible option in the global discovery settings but some devices have the IP instead of their hostname

Can you tell me how to fix this? Thank you.

Chris

1 ACCEPTED SOLUTION

Accepted Solutions

Re: LMS 4.2.1 Discovery IP instead of hostname

DNS is often not understood and just as often implemented badly

When it is working correct you can do 2 things:

ping hostname

will start ping towards the IP address of the host.

ping -a

will resolve the ip to a hostname if possibe and then start a ping towards the IP address.

Often only the first works. Reverse lookup is required by LMS as well.

if you can fix the DNS you can always create a local hosts file

Cheers,

Michel

7 REPLIES

Re: LMS 4.2.1 Discovery IP instead of hostname

DNS is often not understood and just as often implemented badly

When it is working correct you can do 2 things:

ping hostname

will start ping towards the IP address of the host.

ping -a

will resolve the ip to a hostname if possibe and then start a ping towards the IP address.

Often only the first works. Reverse lookup is required by LMS as well.

if you can fix the DNS you can always create a local hosts file

Cheers,

Michel

New Member

LMS 4.2.1 Discovery IP instead of hostname

Hi Michael,

thank you for your reply. It works. The second one takes a bit longer till the first ping gets through but it works.

Have a nice day,

Chris

New Member

Re: LMS 4.2.1 Discovery IP instead of hostname

I beg your pardon, Michel. I´ll check the DNS entries once again and give it another try. Thank you

Re: LMS 4.2.1 Discovery IP instead of hostname

Tag Christian,

So does the second 'ping -a'  resolve to a hostname?

Perhaps post a screenshot of the global settings of the discovery

Cheers,

Michel

New Member

Re: LMS 4.2.1 Discovery IP instead of hostname

Tag Michel,

yes, i´ve checked the DNS entries with our server team and they told me that te reverse-lookup are not entered for that devices although i can ping a device with ping -a

Strange.

Well, i´ll enter the missing reverse-lookups and will see if these solves the problem. Thank you for your time.

Chris

New Member

LMS 4.2.1 Discovery IP instead of hostname

Michel,

the reverse entries are now configured in the DNS Server and the discovery works now. Great, thank you.

Cheers,

Chris

LMS 4.2.1 Discovery IP instead of hostname

Christian

You may find that in (DFM) fault management devices remain with their IP address only.

Easiest solution is to disable the fault management module, wait for an hour or so. And then re-enable it again.

This will make DFM remove the devices from its repository and rediscover them afterwards.

This will use at bit of CPU   :-)

Cheers,

Michel

422
Views
0
Helpful
7
Replies