LMS 4.2.3 discrepancies and deviations change when not on the network
I am performing an assessment using LMS 4.2.3 and collected all of the inventory and configurations successfully. I am running LMS on an engineering laptop and to ease my remote access, I moved it from the customer site to one of our offices. I had already captured the summary of the best practice deviations and discrepancies and now several days later I am trying to get the details but most of the original data is missing, including what was in the summary tables. Do I have to be actively polling the managed devices for these tables to maintain their information or is there a way for LMS to recalculate these from the saved configurations?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...