I have experience in LMS 3.2 and my company asked me to install and LMS 4.2. I have all documents about LMS 4.2 but it is taking time to read and doing as per document. I started discovery but the problem is last two days it is running and finds 50 % of devices only and still the staus is running. The Network topology is 2 CORE switch ( Discovered) , connecto to 2 Distribute switch and Server form switch ( Discovered) Access Switches are connected to the Distribute switch some are Discovered most of not found. Some Access switches are connected to neighbor Access Switches it is not directly connected to Distribued Switch.
Please advise normally how long will take for discovering 70-80 devices ? How to trouble shoot for non discovering devices ?
Almost 90% of devices discovered. The problem is there is device connected to parent device and parent device connected to Distribute switch. The daughter switch and distribute switches are discovered but the parent device is missing. So there are 3 deivces are not connected in topology view. How can I find the parent device? How to add device manually?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...