Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 4.2 Unresponsive Alarms not clearing on their own

just installed fresh copy of windows 2008 r2 and fresh lms 4.2 and restored from backup 4.0.1.  our server had a nic driver problem so all devices reported unresponsive. in 4.0.1 alarms would clear out on their own but now these alarms are not clearing out. please advise on what to check to find out why they are not clearing out on their own.

for example

Event Source DFM

Event Category Reachability

Fault Last Updated At 06-May-2012 13:06:38

Event_Description Unresponsive

Component SwitchA

ComponentClass OnAnyClass

ComponentEventCode 1089

SystemObjectID .

fault last updated when the nic driver failed. rebooted the server and everything is working fine now but the fault/alarm/alert is still stuck there.

Everyone's tags (4)
CreatePlease to create content