Multiple catalyst4506 network. One of the vlans in the environment is dedicated to a subsidiary company. The operators in this vlan want to be able to enable/disable and add descriptions to the ports in their vlan. They have one switch which I was able to lock down, however they also have a blade in one of the parent company's switches. Can I limit their access to that specific blade or to their vlan on the switch? Thanks for the help
The only restricting you can do is with ACS. With ACS, you can restrict certain LMS users to only being able to access certain devices. This is done by creating NDGs within ACS, then attaching the ACS users to those NDGs for LMS roles.
However, you cannot limit access to a specific VLAN or interface on a switch (without using something like VRFs on the device). LMS + ACS will only give you device-level access.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...