You can create new views by clicking on the manage views icon on the upper right-hand corner of the portal screen. If you create these views under the Private portal, then only YOU will be able to see them. However, if you crate the views under the Public portal, then ALL users can see them.
There is no way to restrict views to certain individual users.
i like ur valuable knowledge base given in netpro forun,
i hav created a local user called lan for LAN purpose and Wan For WAN purpose , my requirement is to how to give separate groups for lan & Wan in Device Discovery & separate access to mdify the Devices in Lan & Wan
Integration only works with ACS. A third party TACACS+ server will not. If you want to use LMS with a third party TACACS+ server, you can only use the TACACS+ login module. This is configured under Common Services > Server > Security > AAA Mode Setup. You must choose Non-ACS mode, and configure the TACACS+ module.
The LMS server must be able to reach the TACACS+ server on the desired TCP port (tcp/49 by default).
From the LMS server, you can telnet to the TACACS+ server on TCP port 49. If you get a successful connection, that's half the battle. A sniffer trace of an actual TACACS+ session would confirm that requests and replies are happening.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...