06-16-2008 08:07 AM
Hi,
we have installed a LMS 3.0.1. We have scheduled the pollings and the collections but we want to tune our LMS a bit more.
We want that LMS fetches the configs automatically just after making changes in those configs.
How could it be done? I've thought via syslog but I don't know exactly how to do it.
Regards.
Solved! Go to Solution.
06-16-2008 08:47 AM
this is working out-of-the-box. You need to disable this function if you do not want it! It is setup in RME as an automatic-action (AA) for certain syslog messages. Control the settings here:
RME > Tool > Syslog > Automatic Actions
2 records should be there: 'Inventory Fetch' and 'Config Fetch' where the later is just doing what you want - if its status is set to 'Enabled'
06-16-2008 08:47 AM
this is working out-of-the-box. You need to disable this function if you do not want it! It is setup in RME as an automatic-action (AA) for certain syslog messages. Control the settings here:
RME > Tool > Syslog > Automatic Actions
2 records should be there: 'Inventory Fetch' and 'Config Fetch' where the later is just doing what you want - if its status is set to 'Enabled'
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: