CiscoWorks uses the host name, as opposed to the IP address or DNS FQDN, for most name-related dependencies. So, nothing should need to be done to the CiscoWorks installation on the server per se. If you are integrated with external servers (ACS or OpenView, for example), those specifics may need to be modified.
One changes the IP address of the server in the usual way, depending on whether the installation is on Solaris or Windows. The server's domain name is, of course, even less involved as the change is typically done only on the DNS server.
You may need to change the typical host-based files (/etc/hosts on Solaris or the IP config on Windows) depending on how you have configured the host's domain name - i.e. via a static config or via DHCP.
Of course, any client-based shortcuts or bookmarks would need to be updated. You could enter a forwarder record in DNS to simplify that.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...