Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS - installed, inactive, active ports

Hi

I'm a lms-beginner and want to get these Informations from discovered devices

installed ports of all switches / all routers

active/inactive (free) ports of switzches and routers.

there are so many features and I don't know, if I can get the information and where can I get it - need a lot of help in future - thanks - Arne

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: LMS - installed, inactive, active ports

Then you can use the Switch Port reports in Campus Manager to get what you want. Go to Campus Manager > User Tracking > Reports > Report Generator, and select either the Switch Port Capacity Report or the Switch Port Summary report. The latter will tell you all of your current port usage where as the former will show you at what percentage of capacity your devices currently are.

4 REPLIES
Cisco Employee

Re: LMS - installed, inactive, active ports

What version of LMS do you have?

New Member

Re: LMS - installed, inactive, active ports

I've version LMS 3.0.1

Cisco Employee

Re: LMS - installed, inactive, active ports

Then you can use the Switch Port reports in Campus Manager to get what you want. Go to Campus Manager > User Tracking > Reports > Report Generator, and select either the Switch Port Capacity Report or the Switch Port Summary report. The latter will tell you all of your current port usage where as the former will show you at what percentage of capacity your devices currently are.

New Member

Re: LMS - installed, inactive, active ports

ok - thanks very much

regards Arne

247
Views
0
Helpful
4
Replies