Running LMS 3.1 along with Health Utilization Monitor.
I need a clarification like, is any LMS activity can affect switch/router operation. Because if we run one job in LMS couldn't affect the network devices.
In HUM, running any job's (Polling or threshold) for all switches(including Core) for all instances will affect any operation issues to switches (like switch hang, reset or reboot)? Pls clarify regarding this.
While none of the management operations _should_ affect normal operation, there have been numerous bugs over the years in which SNMP polling as well as interactive command operations have caused CPUHOGs, crashes, performance problems, etc.
HUM only uses SNMP to gather its data. As long as you don't overwhelm devices with polling traffic, you shouldn't see problems, but I can't say for certain that you won't see problems.
If possible, you should test your pollers and templates on non-production devices.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...