12-27-2013 12:51 PM
Is there a way to recover the shell password on the sysadmin cli for LMS prime soft appliance running on VMware ? Thanks
Solved! Go to Solution.
12-27-2013 08:19 PM
Hi,
By default, the shell will be enabled with sysadmin password. If you want to change the shell password, use Vsphere console and enter the command shell_enable in sysadmin mode. On using Vsphere console, you will not have to enter the old password whereas on using other console, you will be prompted to enter the old password. Please refer to the following link on this matter: http://tools.cisco.com/squish/Eb0D6
Hope this will help.
Thanks-
Afroz
[Do rate the useful post]
12-27-2013 08:19 PM
Hi,
By default, the shell will be enabled with sysadmin password. If you want to change the shell password, use Vsphere console and enter the command shell_enable in sysadmin mode. On using Vsphere console, you will not have to enter the old password whereas on using other console, you will be prompted to enter the old password. Please refer to the following link on this matter: http://tools.cisco.com/squish/Eb0D6
Hope this will help.
Thanks-
Afroz
[Do rate the useful post]
12-31-2013 10:32 AM
Works fine. Thanks!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: