Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

LMS Prime 4.3 Shell PW

                   Is there a way to recover the  shell password on the sysadmin cli for LMS prime soft appliance running on VMware ? Thanks 

  • Network Management
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

LMS Prime 4.3 Shell PW

Hi,

By default, the shell will be enabled with sysadmin password. If you want to
change the shell password, use Vsphere console and enter the command
shell_enable in sysadmin mode. On using Vsphere console, you will not have
to enter the old password whereas on using other console, you will be

prompted to enter the old password.

Please refer to the following link on this matter:
http://tools.cisco.com/squish/Eb0D6

Hope this will help.

Thanks-

Afroz

[Do rate the useful post]

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
2 REPLIES
Cisco Employee

LMS Prime 4.3 Shell PW

Hi,

By default, the shell will be enabled with sysadmin password. If you want to
change the shell password, use Vsphere console and enter the command
shell_enable in sysadmin mode. On using Vsphere console, you will not have
to enter the old password whereas on using other console, you will be

prompted to enter the old password.

Please refer to the following link on this matter:
http://tools.cisco.com/squish/Eb0D6

Hope this will help.

Thanks-

Afroz

[Do rate the useful post]

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
New Member

LMS Prime 4.3 Shell PW

Works fine. Thanks!

256
Views
0
Helpful
2
Replies