Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS: Processes shut down automatically

Hi,

We are running LMS 3.0.1 with Common Service version:3.1.1 and Campus Manager Version:5.0.2.

Every time we need to start most of the processes(Common Services>Server>Processes) because every time all the processess are

stoped with a Process State " Administrator has shut down this server".

After restarting all stoped processes after 7-8 hours again all the Processes will stop automatically.

Please helpe out!!

Thanks & Regards,

8 REPLIES
Cisco Employee

Re: LMS: Processes shut down automatically

Non-transient processes don't stop on their own. Check to see if any processes have a failed state. If so, then that is a place to start troubleshooting. You should also check if anyone is doing any software or package updates, or if there is any script being run periodically which takes down daemons (especially if the daemons go down at the same time every day). Some tools on Windows which act as service watchdogs have been known to interfere with LMS. If you are managing CiscoWorks services by something other than the Daemon Manager, turn that off.

New Member

Re: LMS: Processes shut down automatically

I am experiencing the same problem

DFMCTMStartup and DataPurge processes are shutdown

The ProcessState said " Administrator has shut down this server " and they will not start when i try to start them.

FYI

there is no software or package updates taking place. Neither is any periodic scripts running. I am using only the Daemon Manager

Your help will be appreciated

thanks

Cisco Employee

Re: LMS: Processes shut down automatically

These two processes are allowed to be down. "Administrator has shut down this server" is a valid state for these two processes.

New Member

Re: LMS: Processes shut down automatically

thank you for your quick responds

But how do i resolve below Problem from my Critical Message Window Portlet

Processes DFMCTMStartup, DataPurge are down

Log files CVDeviceSelector.log.*, psu.log.* exceeded the recommended size limit

i have run

perl logBackup.pl -force -dir D:\LMSBackups

but the file size for PSU.log* is 4000

while CVDeviceSelector.log* is 10240

These numbers stay the same after running the perl script

what am i doing wrong

thanks

Cisco Employee

Re: LMS: Processes shut down automatically

This issue has nothing to do with this thread. Please start a new thread about your log file sizes.

New Member

Re: LMS: Processes shut down automatically

Hi

It seems I have the same problem.

Did you solve it and if yes, how, please ?

Thanks and regards

Caroline

New Member

Re: LMS: Processes shut down automatically

If you see this issue ensure the server is patched to latest versions,

if starting with LMS 3.0.1 that means:

December 2007 updates

DFM 3.0.3

(obviously do campus/device updates for rme and cv and common service patches too)

New Member

Re: LMS: Processes shut down automatically

If you problem is that DFMCTMStartup and DataPurge are shown as Down in Critical Message window, you are hit by Bug CSCsj32177.

It's a false alarm, not a serious problem with your server.

218
Views
0
Helpful
8
Replies