Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS queries

I am deploying LMS 3.2 in my current environment but I would like to know how much bandwidth it take for polling any remote location device or backup/archive management. For example I have 64Kbps of WAN link.

Pleasee help!

Thanks,

Puneet Khanna

1 REPLY
Cisco Employee

Re: LMS queries

This depends on how often you will be doing things like config archive, what your DFM polling interval is, how many syslog messages you will be sending, how often you will doing SWIM upgrades (and how big the images are), etc.  In general, with weekly config collections, a four minute DFM polling interval, 10 syslogs per minute, you are looking at very low bandwidth usage.  The syslogs take no more than 300 bytes per packet, and the SNMP+ICMP polling is about 2500 bytes every four minutes.  The config collection can be a spike depending on the size of the config, but those are generally no more than 32 KB.

150
Views
0
Helpful
1
Replies