Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS Upgrade.

We're upgrading our Cisco Works LMS from 2.6 to 3.0. However, we also

own Operations Manager and Service Monitor which are both tied into our current LMS

install. They are both tied into the database on the LMS server. Are there any issues

with upgrading LMS given our setup with OM and SM? Any prerequisites for OM or SM before

we perform the in place upgrade to LMS 3.0?

3 REPLIES
Cisco Employee

Re: LMS Upgrade.

First, OM and SM cannot be installed on the same server as LMS. So I imagine you're doing DCR master/slave between the OM and LMS servers. This is fine. If you upgrade LMS to 3.0, you must make sure the LMS server is the DCR master. The OM server can still peer to this server.

New Member

Re: LMS Upgrade.

Thanks,

Yes, it is correct. The LMS server is currently the DCR master. After the upgrade to 3.0,

do I need to do anything at all with OM and SM or is it seamless from the OM and SM

perspective?

Cisco Employee

Re: LMS Upgrade.

You should restart Damon Manager on the OM server. And as always, make sure you have a backup of both servers before you begin, just as a precaution.

216
Views
10
Helpful
3
Replies