Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS with HUM for 5000 devices

Hi,

we're going to install a LMS with HUM for 5000 devices. We can see in the hardware requirements doc that "HUM and CS must be installed in a standalone server, which manages 1000 devices".

My questions are:

1- And the other 4000 devices?

2- Is it mandatory to install HUM and CS in a separate server?

3- Which are the hardware requirements for this server with HUM and CS?

4- Is it possible to configure the LMS CiscoWorks as master and the server with HUM and CS as slave?

Many thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: LMS with HUM for 5000 devices

HUM can only support up to 1000 devices. See http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_health_and_utilization_monitor/1.2/Install/guide/HUMprqst.html#wp1058394 for the hardware and software requirements.

1 REPLY
Cisco Employee

Re: LMS with HUM for 5000 devices

HUM can only support up to 1000 devices. See http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_health_and_utilization_monitor/1.2/Install/guide/HUMprqst.html#wp1058394 for the hardware and software requirements.

128
Views
0
Helpful
1
Replies
CreatePlease to create content