Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS2.6 DFM Problem

Hello,

We have devices shown in RME & Common services that are not appearing in DFM.

How do I make sure that all my devices are consistant ?? (ie: whats in RME = DFM)

Scott.

4 REPLIES
Cisco Employee

Re: LMS2.6 DFM Problem

You can try adding on of the missing devices to DFM manually. Once you add it, does it go to a known state or does it get stuck in learning or go to a questioned state?

New Member

Re: LMS2.6 DFM Problem

I must be really thick because I cannot see how you manually add to DFM, there is not a manual operation for this ??

Cisco Employee

Re: LMS2.6 DFM Problem

First have a look at DFM - Device Management - Rediscover/Delete

Do the missing devices appear there under Questioned or Unknown? If so, what subcategory do they fall into?

to add them, go to DFM - Device Management - Device Selector and then select devices showing as not in DFM.

New Member

Re: LMS2.6 DFM Problem

Hi,

Are devices that are added to DCR shown in the DFM device selector? Check if the auto sync is enabled so that the devices are added to DFM, if its not enabled please select the devices and add manually to DFM.

Thanks,

Radhika

116
Views
0
Helpful
4
Replies
CreatePlease login to create content