Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS3.1 Software Distribution Failing

I'm trying to distribute/load IOS on our 4507 switches via the RME softwre distibutin (LMS3.1) but its FAILING.

On the 4507 switches we are currently running 122-40.SG on some and 122-50.SG on others but RME fails on both platforms when trying to load the 122-53.SG IOS and comes up with a message:-

Catastrophic - SWIM1200:Selected Flash partition requires minimum (64 MB) to upgrade selected software/image.

Select a different Flash partition for upgrading the image.

The new image is only about 16MB and I've deleted and squeezed old images from flash and there is more than 45MB available in flash.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: LMS3.1 Software Distribution Failing

You are seeing CSCsu49349. The workaround is to edit the image attributes in the SWIM Repository so that the requirements for flash are substantially less. The fix is in LMS 3.2.

1 REPLY
Cisco Employee

Re: LMS3.1 Software Distribution Failing

You are seeing CSCsu49349. The workaround is to edit the image attributes in the SWIM Repository so that the requirements for flash are substantially less. The fix is in LMS 3.2.

305
Views
0
Helpful
1
Replies