Device selection doesnt work for Monitoring=>Eventconsole/Syslog, but you can filter with the filter function inside Eventconsole/Syslog
but without the possibility for device filtering. Message-Box "No device found ... " will appear also with selecting "All devices"
Device selection (OGS) works in any other applications - with being extremly slow for nested user defined groups btw - including to generate syslog reports from report generator.
Because Spectrum is used for FM in this network, customer will save resources at the slow GUI responding LMS server and switched DFM off, by deactivation at Admin > System > Device Management Functions.
Is the device selection issue in Monitoring=>Eventconsole/Syslog a known bug and can count with a bugfix in future?
P.S.: after switching the GUI to https, the syslog subscription has been stopped due to a cerificate trusting issue. I expect from a prime SW that this should be included in the https mode switching automaticly.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...