Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Mainframe Channel Connection / get values by SNMP

Hi,

I want to get the result of the following command with snmp. Is This possible?

csna oper.jpg

The command is "show extended channel 2/0 csna oper". I need to know, if the status is "closed" or "setupcomplete".

Can I catch these values with snmp?

I did a snmpwalk but can´t find any lines with these values. Is there a specific IOS version necessary?

The hardware is a Cisco 7204VXR with IOS 12.1(5)T10 and microcode xcpa28-1

Thx for help,

Patrick

Everyone's tags (7)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: Mainframe Channel Connection / get values by SNMP

I have no topology to verify this but according to the object navigator those OID from CISCO-CIPCSNA-MIB look promising:

    cipCardCsnaOperState    1.3.6.1.4.1.9.9.33.1.1.2.1.1

see details here:

on this site is also a link to supporting images (12.1(5)T10 is listed as supporting)

cipCardCsnaOperState

the CISCO-CIPCSNA-MIB

http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=CISCO-CIPCSNA-MIB

the OID file

ftp://ftp.cisco.com/pub/mibs/oid/CISCO-CIPCSNA-MIB.oid

the MIB definition

ftp://ftp.cisco.com/pub/mibs/v2/CISCO-CIPCSNA-MIB.my

2 REPLIES

Re: Mainframe Channel Connection / get values by SNMP

I have no topology to verify this but according to the object navigator those OID from CISCO-CIPCSNA-MIB look promising:

    cipCardCsnaOperState    1.3.6.1.4.1.9.9.33.1.1.2.1.1

see details here:

on this site is also a link to supporting images (12.1(5)T10 is listed as supporting)

cipCardCsnaOperState

the CISCO-CIPCSNA-MIB

http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=CISCO-CIPCSNA-MIB

the OID file

ftp://ftp.cisco.com/pub/mibs/oid/CISCO-CIPCSNA-MIB.oid

the MIB definition

ftp://ftp.cisco.com/pub/mibs/v2/CISCO-CIPCSNA-MIB.my

Re: Mainframe Channel Connection / get values by SNMP

That is exactly what I was looking for.

Thanks a lot

Patrick

484
Views
0
Helpful
2
Replies
CreatePlease to create content