Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Management of VG248 analog phone gateways

Hi all,

Is management of VG248s done only by Unified Operations Manager or does anyone know if CS LMS will provide support?

Cheers

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: Management of VG248 analog phone gateways

LMS does support these devices in the sense that they are visible in Campus Manager, and DFM can poll for events. The VG248s are also manageable by CUOM. In all cases, they must be running 1.1(2.1.5) or 1.2(1) or later.

Cisco Employee

Re: Management of VG248 analog phone gateways

Neither suite does config management for these devices.

6 REPLIES
Cisco Employee

Re: Management of VG248 analog phone gateways

LMS does support these devices in the sense that they are visible in Campus Manager, and DFM can poll for events. The VG248s are also manageable by CUOM. In all cases, they must be running 1.1(2.1.5) or 1.2(1) or later.

New Member

Re: Management of VG248 analog phone gateways

Thanks for that. Does CUOM manage configs for the VG248s?

Cisco Employee

Re: Management of VG248 analog phone gateways

Neither suite does config management for these devices.

New Member

Re: Management of VG248 analog phone gateways

Thanks Joe, saves on a lot of reading.

New Member

Re: Management of VG248 analog phone gateways

since config backups are not supported...does anyone know how to remove them from the 'failed' list on the config archive management summary within RME?

Cisco Employee

Re: Management of VG248 analog phone gateways

You cannot other than not adding them to config sync jobs. However, system config sync jobs will fetch all managed devices, and this cannot be changed.

155
Views
0
Helpful
6
Replies
CreatePlease login to create content