Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Managing & monitoring virtualized networks

Hi all,

We are building LAN networks with L3 Core & distribution and L2 access using VLAN for L2 and VRF-Lite for L3 device. With these virtualization technologies, we are able to build many independent virtualized networks for different clients, based on only one physical infrastructure (Cat 3750G-48TS-E for L3 and Cat 3560-48PS-S).

With the PS version, we are implementing also IP telephony.

Each client will have at least 2 virtualized networks, one for data and the other for IP telephony. We may have 3 to 4 gov's agencies in the same building sharing the physical network. This lead to 6 to 8 completely independent virtualized networks.

Now, how to provide monitoring (SNMP read) access to their virtualized network by each client?

Is there some specific MIBS who are VRF-Aware?

Thanks to share your experience with that kind of setup.

Regards

Ben

115
Views
0
Helpful
0
Replies