Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Managing WLC's in RME (LMS3.1)

I want to be able to save my WLC's config in RME as it does for my switches/routers. However, I keep getting the message that it is not supported. does anyone know if there is a device package for WLC or if Cisco plans on future support for it? if not how does one save (scheduled) configs for the WLC? Can it be done by WCS?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Managing WLC's in RME (LMS3.1)

The device package for RME 4.2 is currently available from Cisco.com. Go to Common Services > Software Center > Device Update, select RME, then download all available device updates. The WLC support comes as part of that.

9 REPLIES
Cisco Employee

Re: Managing WLC's in RME (LMS3.1)

The device package for RME 4.2 is currently available from Cisco.com. Go to Common Services > Software Center > Device Update, select RME, then download all available device updates. The WLC support comes as part of that.

New Member

Re: Managing WLC's in RME (LMS3.1)

What Protocols are supported for the WLC config fetch ?

Cisco Employee

Re: Managing WLC's in RME (LMS3.1)

Telnet and SSH.

New Member

Re: Managing WLC's in RME (LMS3.1)

Doesn't work in our environment. Config Fetch always fails on the WLC.

The Credentials ( Telnet, Telnet enable, SNMP RO ) are all corect, also the inventory collection is successful.

For the Config fetch I always get the following error-message.

Selected Protocols with order ==> SSH,Telnet,TFTP

Execution Result:

Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Resource Manager Essentials -> Admin -> Config Mgmt -> Archive Mgmt ->Fetch Settings

I already increased the Fetch Settings time from 120 to 300 without success.

New Member

Re: Managing WLC's in RME (LMS3.1)

Yes it was failing for me inspite of the LMS patch/device package... and then I found one small pc. of info in one of cisco's pdfs...

the WLC has to be min 5.0.148.0 !!

Cisco Employee

Re: Managing WLC's in RME (LMS3.1)

I found a serious bug in config archive with SSH and the WLC, MDS, etc. platforms. An infinite loop gets triggered. I have a patch which is available by contacting the TAC and referencing CSCsv95235.

New Member

Re: Managing WLC's in RME (LMS3.1)

I am having problems with the config fetch on the NME-AIR-WLC8-K9 running 5.1.151.0. I am using telnet, not ssh so the bug you mentioned doesn't apply. I've checked/re-checked credentials, I can telnet fine to the device but config fetch fails (however inventory collection does work).

Please let me know if you have any ideas on this.

Thanks

Cisco Employee

Re: Managing WLC's in RME (LMS3.1)

Please start a new thread for your problem.

New Member

Re: Managing WLC's in RME (LMS3.1)

Hello Joe,

the patch is working fine.

Many thanks for the great support.

204
Views
5
Helpful
9
Replies
CreatePlease to create content