Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Measuring the Point-to-Point Lease Line Bandwidth

Dear All,

Any tools that can use it for test the available bandwidth for the point-to-point lease line?

4 REPLIES

Re: Measuring the Point-to-Point Lease Line Bandwidth

Hi

If you want to have a check on the bandwidth utilization on your leased line you can very well check using show interface serial x/x on which your link is connected.

If you want to have records on the periodic bandwidth usage you can check these links out..

http://www.mrtg.org

http://people.ee.ethz.ch/~oetiker/webtools/mrtg/mrtg-nt-guide.html

http://www.cacti.net

http://www.slac.stanford.edu/xorg/nmtf/nmtf-tools.html

http://www.solarwinds.net/Tools/Engineer/index.htm

regds

Silver

Re: Measuring the Point-to-Point Lease Line Bandwidth

Hi ,

you can check the bandwidth using what's up gold freeware.It gives detailed info about the bandwidth utilization.

New Member

Re: Measuring the Point-to-Point Lease Line Bandwidth

Dear smothuku,

any url that can download the freeware that you mention?

Thank you.

Silver

Re: Measuring the Point-to-Point Lease Line Bandwidth

Hi,

U can download freeware using the following link.

http://www.uksuperweb.co.uk/whatsup.html.

You can monitor the status each and every device in your network and bandwidth utilization of each device.

Thanks,

satish

878
Views
0
Helpful
4
Replies