Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

%MGBL-exec-3-ACCT_ERR

hi, is there anybody knows about "%MGBL-exec-3-ACCT_ERR"? My client came across this error few days ago. The error followed with "main: command accounting failed - 'LOCALD' detected the 'fatal' condition 'No available method was able to process the request' ". going through the logs I found out that few users tried to do the SSHD to ASR device but authentication failed.

"%SECURITY-SSHD-4-INFO_FAILURE "

"Failed authentication attempt by user 'lablablab' from '1.18.3.41' on 'vty0' "

I just want to know about this error and the reasons are resulted of generating these logs? 

Cheers 

Bruce 

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Hi Bruce,On the First look

Hi Bruce,

On the First look these error message looks cosmetic errors and can be ignored.

Here is some more details about the errors.

The specific error occurs when the ssh server sets up a new connection to handle the
remote client's request.The first step in handling the client request will be to spawn a
new process to handle the job, to accept the connection.

In this case when the connection is being accepted the the server fails the accept call,
with an error that the resource (the underlying TCP connection) is not available to
process the request

This is a race condition, which happens since the TCP connection is already torn down
before SSH handler could handle it.

This condition will not cause any error or memory leak, since the caller already returned
and the associated TCP conn resources are already freed, by the time this error condition
is encountered

this is also documented in the below BUG:
CSCtt05683    %SECURITY-SSHD-3-ERR_ERRNO : Error in accept Resource temporarily unava

you can open a TAC case ,in case you need further details or troubleshooting ...

 

Thanks-

Afroz

***Rating Encourages Contributors ***

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
3 REPLIES
Cisco Employee

Hi Bruce,On the First look

Hi Bruce,

On the First look these error message looks cosmetic errors and can be ignored.

Here is some more details about the errors.

The specific error occurs when the ssh server sets up a new connection to handle the
remote client's request.The first step in handling the client request will be to spawn a
new process to handle the job, to accept the connection.

In this case when the connection is being accepted the the server fails the accept call,
with an error that the resource (the underlying TCP connection) is not available to
process the request

This is a race condition, which happens since the TCP connection is already torn down
before SSH handler could handle it.

This condition will not cause any error or memory leak, since the caller already returned
and the associated TCP conn resources are already freed, by the time this error condition
is encountered

this is also documented in the below BUG:
CSCtt05683    %SECURITY-SSHD-3-ERR_ERRNO : Error in accept Resource temporarily unava

you can open a TAC case ,in case you need further details or troubleshooting ...

 

Thanks-

Afroz

***Rating Encourages Contributors ***

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
New Member

Thanks Afroz, it is hard to

Thanks Afroz, it is hard to find a proper answer for these sort of errors. Appreciate it.

 

New Member

I am facing below problem in

it is a fresh installation and the device is not connnected to ny network yet. 

I am facing below problem in one of ASR 9010 router while configuring .  I am unable to config anything after entering any command this error shows up

 

RP/0/RSP0/CPU0:hostname(config)#interface TenGigE0/1/0/0
RP/0/RSP0/CPU0:Jan 15 12:48:41.186 IST: config[65887]: %MGBL-CONFIGCLI-3-AAA_ERR : Failed to execute a AAA operation - Command accounting failed -  - 'LOCALD' detected the 'fatal' condition 'No available method was able to process the request'
RP/0/RSP0/CPU0:(config-if)# description # TO-Remote_site
RP/0/RSP0/CPU0:hostname(config-if)#RP/0/RSP0/CPU0:Jan 15 12:48:41.263 IST: config[65887]: %MGBL-CONFIGCLI-3-AAA_ERR : Failed to execute a AAA operation - Command accounting failed -  - 'LOCALD' detected the 'fatal' condition 'No available method was able to process the request'

RP/0/RSP0/CPU0:hostname(config-if)#commit
Thu Jan 15 12:48:50.521 IST
RP/0/RSP0/CPU0:Jan 15 12:48:50.521 IST: config[65887]: %MGBL-CONFIGCLI-3-AAA_ERR : Failed to execute a AAA operation - Command accounting failed -  - 'LOCALD' detected the 'fatal' condition 'No available method was able to process the request'

 

it is not allowing even to commit any change

and I am unable to find any online solutions for this.

 

please help

following packages are active right now

 

disk0:asr9k-doc-px-4.3.4
    disk0:asr9k-fpd-px-4.3.4
    disk0:asr9k-k9sec-px-4.3.4
    disk0:asr9k-mcast-px-4.3.4
    disk0:asr9k-mgbl-px-4.3.4
    disk0:asr9k-bng-px-4.3.4
    disk0:asr9k-mini-px-4.3.4
    disk0:asr9k-mpls-px-4.3.4

 

PS: please tell what more output are needed so that this problem can be solved.

1543
Views
5
Helpful
3
Replies
CreatePlease login to create content