Hello all, the SUP V running IOS is confusing me. I will not be using VLAN 1 for the mght IP address. I will be using VLAN 55. Vlan 55 is not currently up and running yet so I don't anticipate putting a mgnt ip address on int vlan 55 until I get this switch on the vtp domain. Is there another virtual interface I should be using for the mgnt ip address?
Yes I have added the vlan manually prior to actually plugging it in the the 'production' vlan trunks. This is probably why the interface still shows 'down' state. I'll have to plug it in next week when I get back from vacation.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...