Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Mib 1.3.6.1.4.1.9.3.6.11.1.3 failing with WIC-1B-S/T-V3 card

For every router in our organization, if we run snmpwalk with MIB : 1.3.6.1.4.1.9.3.6.11.1.3 on a router that has WIC-1B bri card, we get no response..........is it a known issue ?

The chasis is 1721 and IOS is c1700-sy7-mz.123-17a ....I've verified that IOS supports this particular MIB i.e OLD-CISCO-CHASSIS-MIB

1 REPLY
Cisco Employee

Re: Mib 1.3.6.1.4.1.9.3.6.11.1.3 failing with WIC-1B-S/T-V3 card

The OLD-CISCO-CHASSIS-MIB is a deprecated MIB, so you might want to look at the ENTITY-MIB. Specifically look at the entPhysicalTable and the objects contained in this table:

http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&submitClicked=true&mibName=ENTITY-MIB#contents

123
Views
5
Helpful
1
Replies