Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MIB CISCO-CLASS-BASED-QOS-MIB is supported on all Cisco Routers

We have a discussion with eHealth via partners to view the QoS traffic on the routers. They stated that we should activate the MIB variable on the router. Therefore, can someone tell me if the MIB CISCO-CLASS-BASED-QOS-MIB is supported on all Cisco Routers?

Or can it be activated? This MIB tree starts at OID 1.3.6.1.4.1.9.9.166

Thanks

Lode

4 REPLIES
Cisco Employee

Re: MIB CISCO-CLASS-BASED-QOS-MIB is supported on all Cisco Rout

You can use the MIB Locator to search for IOS images which support this MIB. If the image supports the MIB, there is nothing additional that must be done to enable it. Just enabling SNMP and configuring the required QoS parameters are enough.

http://tools.cisco.com/ITDIT/MIBS/MainServlet

New Member

Re: MIB CISCO-CLASS-BASED-QOS-MIB is supported on all Cisco Rout

The mib locater indicates that the mib tree exists on the router but a snmpwalk give no result:

Met OID .1.3.6.1.4.1.9.9.166

bash-2.05$

bash-2.05$ ./GetTable2.pl

No results found for 164.140.221.11 with ***

bash-2.05$

output of show version:

Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXH, RELEASE SOFTWARE (fc5)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Sun 19-Aug-07 07:38 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)S4, RELEASE SOFTWARE (fc1)

nabxpr01 uptime is 28 weeks, 1 day, 20 hours, 37 minutes

Uptime for this control processor is 28 weeks, 1 day, 20 hours, 42 minutes

Time since nabxpr01 switched to active is 28 weeks, 1 day, 20 hours, 40 minutes

System returned to ROM by reload at 09:47:37 UTC Wed Aug 22 2007 (SP by reload)

System restarted at 15:48:44 GMT+1 Wed Nov 14 2007

System image file is "bootdisk:s72033-advipservicesk9_wan-mz.122-33.SXH.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco WS-C6509-E (R7000) processor (revision 1.4) with 458720K/65536K bytes of memory.

Processor board ID SMC11250066

SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache

Last reset from s/w reset

1 Virtual Ethernet interface

50 Gigabit Ethernet interfaces

16 Ten Gigabit Ethernet interfaces

1917K bytes of non-volatile configuration memory.

8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x2102

Blue

Re: MIB CISCO-CLASS-BASED-QOS-MIB is supported on all Cisco Rout

Try snmpwalking 1.3.6.1.4.1.9.9.166.1.15.1.1.10 directly. This is cbQosCMPostPolicyByte64 that eHealth's QoS module uses to calculate "Post-Policy Throughput". It should be populated.

New Member

Re: MIB CISCO-CLASS-BASED-QOS-MIB is supported on all Cisco Rout

Thanks for your feedback. There was a small mistake in the configuration of the router concerning QoS which I have overlooked.

Thanks for your assistance it is working fine now.

571
Views
5
Helpful
4
Replies