MIB for module information

[mayambanzumba]

I run reports for inventory which run on  SNMP however I am not getting  modules information. We got information the Mib  that application picks from devices does not contains the Mib which contains the information for  modules.  Which MIB on the Cisco tree pertains to module information?  The affected devices and software are as follows.

cisco  WS-C4507R                 System image file is  "bootflash:cat4000-i9k91s-mz.122-25.EWA5.bin"

cisco Cat6k-MSFC2 (R7000)        System image file is "bootflash:c6msfc2-psv-mz.121-13.E11.bin"

Model: WS-C6509                  System Boot Image File is 'bootflash:cat6000-sup2k8.7-6-5.bin'

cisco WS-C4507R-E                Software (cat4500-ENTSERVICESK9-M),Version 12.2(44)SG,

cisco WS-C4510R         System image file is  "bootflash:cat4000-i9k91s-mz.122-25.EWA5.bin"

Thanks

Mayamba

[Martin Ermel]

as jclarke mentioned in this thread, chassis and line-card information comes from ENTITY-MIB or CISCO-STACK-MIB

ENTITY-MIB:

http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=CISCO-ENTITY-ASSET-MIB

CISCO-STACK-MIB:

http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=CISCO-STACK-MIB

Also see this thread about inventory collection:

https://supportforums.cisco.com/message/639144#639144

[mayambanzumba]

Hi,

Thanks very much, this solved the problem.

Mayamba

Mayamba Mwanza

Level 2 Technical Support Engineer

Dimension Data Europe

Tel: +44 12 5277 9150

Fax: +44 12 5277 9010

mayamba.mwanza@eu.didata.com

Dimension Data House, 2 Waterfront Business Park, Fleet Road, Fleet, Hampshire, GU51 3QT, United Kingdom

For further information about Dimension Data, please go to http://www.dimensiondata.com/

P Before printing this email please think about the environment