Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MIB walk for a router with RMON alarmTable populated

To perform some testing in an agent I ma building I need a MIB walk for a router with RMON alarmTable populated. Does any one know where I can get one?

Cisco Employee

Re: MIB walk for a router with RMON alarmTable populated

Here's one from one of our lab devices:

RMON-MIB::alarmIndex.10 = INTEGER: 10

RMON-MIB::alarmIndex.999 = INTEGER: 999

RMON-MIB::alarmIndex.13244 = INTEGER: 13244

RMON-MIB::alarmInterval.10 = INTEGER: 60 Seconds

RMON-MIB::alarmInterval.999 = INTEGER: 10 Seconds

RMON-MIB::alarmInterval.13244 = INTEGER: 20 Seconds

RMON-MIB::alarmVariable.10 = OID: RS-232-MIB::rs232Number.0

RMON-MIB::alarmVariable.999 = OID: IF-MIB::ifOperStatus.15

RMON-MIB::alarmVariable.13244 = OID: CISCO-PROCESS-MIB::cpmCPUTotal5sec.1

RMON-MIB::alarmSampleType.10 = INTEGER: absoluteValue(1)

RMON-MIB::alarmSampleType.999 = INTEGER: absoluteValue(1)

RMON-MIB::alarmSampleType.13244 = INTEGER: absoluteValue(1)

RMON-MIB::alarmValue.10 = INTEGER: 0

RMON-MIB::alarmValue.999 = INTEGER: 2

RMON-MIB::alarmValue.13244 = INTEGER: 4

RMON-MIB::alarmStartupAlarm.10 = INTEGER: risingOrFallingAlarm(3)

RMON-MIB::alarmStartupAlarm.999 = INTEGER: risingOrFallingAlarm(3)

RMON-MIB::alarmStartupAlarm.13244 = INTEGER: risingOrFallingAlarm(3)

RMON-MIB::alarmRisingThreshold.10 = INTEGER: 1

RMON-MIB::alarmRisingThreshold.999 = INTEGER: 2

RMON-MIB::alarmRisingThreshold.13244 = INTEGER: 80

RMON-MIB::alarmFallingThreshold.10 = INTEGER: 0

RMON-MIB::alarmFallingThreshold.999 = INTEGER: 1

RMON-MIB::alarmFallingThreshold.13244 = INTEGER: 20

RMON-MIB::alarmRisingEventIndex.10 = INTEGER: 1

RMON-MIB::alarmRisingEventIndex.999 = INTEGER: 999

RMON-MIB::alarmRisingEventIndex.13244 = INTEGER: 1

RMON-MIB::alarmFallingEventIndex.10 = INTEGER: 2

RMON-MIB::alarmFallingEventIndex.999 = INTEGER: 1000

RMON-MIB::alarmFallingEventIndex.13244 = INTEGER: 2

RMON-MIB::alarmOwner.10 = STRING: "config"

RMON-MIB::alarmOwner.999 = STRING: "jclarke"

RMON-MIB::alarmOwner.13244 = STRING: "me"

RMON-MIB::alarmStatus.10 = INTEGER: valid(1)

RMON-MIB::alarmStatus.999 = INTEGER: valid(1)

RMON-MIB::alarmStatus.13244 = INTEGER: valid(1)

New Member

Re: MIB walk for a router with RMON alarmTable populated


Is there a chance I can get an electronic copy of the walk for the whole router? :-)

We use mimic to simulate our devices and actually load the device walks into mimic to test with.

Cisco Employee

Re: MIB walk for a router with RMON alarmTable populated

I can't give you the walk of the entire tree, but here are walks of the IF-MIB, CISCO-PROCESS-MIB, and RS-232-MIB which are referenced in this alarmTable.

New Member

Re: MIB walk for a router with RMON alarmTable populated

thank you. I think I can manage with that

CreatePlease login to create content