Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Mini-RMON

Hi,

Is it possible to get traffic utilization per port based on the protocols like TCP, UDP, ICMP with CiscoView Mini-RMON.

Regards,

Sushil

3 REPLIES
Cisco Employee

Re: Mini-RMON

Mini RMON manager is going to give you basic ethernet statistics and history, along with being able to create some rmon alarms.

For the above you would need something that supports RMON-II such as a NAM.

New Member

Re: Mini-RMON

Thanks for the reply. But the issue is that the switch we have does not supports the NAM modules. And in the network also there is no device which can support NAM module.

In that case what could be the possible solution.

Regards,

Sushil

Cisco Employee

Re: Mini-RMON

You will need an external RMON-compliant probe or sniffer (e.g. a Netscout RMON probe). Alternatively, Netflow data exports may provide you with some of what you want. There are quite a few Netflow collection and reporting options from both commercial and Open Source vendors.

118
Views
10
Helpful
3
Replies