Sorry - I wrote from home and recollected wrong - the IOS is 12.4(3e) and SDM is 2.4.
I have two redundant 3845 routers (using glbp)and the SDM monitor shows or doesn't show exactly the same interfaces. I've attached a sanitized interface parameters list from the running cfg of one router. I've put a # after ones that show and ? after those that don't. I wouldn't expect the null or shutdown interfaces to be monitor capable but I would expect the others and can't see any pattern that might explain why or why not.
The missing subinterfaces on gi0/1 are on the second built in gigabit interface, the four port fast fa0/1/0 to 3 are in WIC slot 1, and the two gigabit Ethernet NM-1GE= cards are in NM slots 3 and 4. I don't see the subinterfaces of gi3/0 or the physical interface of gi4/0. I clicked on the SDM hardware details on the home page(attached) and it says it doesn't recognize either NM-1GE= in slots 3 or 4. Is there a clue there?
Clicking on the physical interface (left or right) in the devices to monitor window doesn't do anything.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...