I have configured the Qos on my Core switch (C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(44)SE1) and I have notified that when MLS QOS is activate on the Core then it's not possible to match EF DSCP packet on my input policyp-map located on my WAN Router.
But when I remove the MLS QOS then I can match the EF DSCP packets, why ?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...