I want to monitor the temperature of the CIsco 7609 i have found the OID responsible for the temperature but it has many instance..although the machine reports many temperatures from all cards and ASIC chips...can you please tell me which are the most important to monitor? INstead to monitor all sensors!?
All sensors are important. If one component gets too hot, you could lose a card or ports on a card. Clearly the sensors on your supervisor(s) are the most important. What you might consider doing instead of polling all sensors all the time, is rely on the device to send ciscoEnvMonTemperatureNotification (old) or ciscoEnvMonTempStatusChangeNotif (new) traps to alert you when the temperature becomes too high.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...