Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Monitoring CRC errors

Hi,

Can somone please let me know how to configure a cisco box to send CRC errors in to SNMP/MIB polling server.

Ok what I want to do is to have CRC alerts in Netcool when they are increasing.

Thanks in advance.

4 REPLIES
Cisco Employee

Re: Monitoring CRC errors

You need to poll the object locIfInCRC

(.1.3.6.1.4.1.9.2.2.1.1.12) and setup Netcool for thresholds

-or-

you could setup rmon alarms/events for these objects:

http://www.cisco.com/warp/public/477/RMON/18.html

New Member

Re: Monitoring CRC errors

Hi Davistan,

Thanks for your reply.

Can you please let me know whether I have to do any config on the device to enable locIfInCRC. or is it just config on the netcool server?

Cisco Employee

Re: Monitoring CRC errors

This is something you need to do on the netcool server. The MIBs are already built into the IOS and will respond to queries from netcool.

The only thing you will need to do on the device is enable snmp

snmp-server community public RO

New Member

Re: Monitoring CRC errors

Thanks Davistan. snmp-server community public RO is alrady enabled. will try on the server side.

532
Views
0
Helpful
4
Replies