Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Monitoring question

Hi ,

How to enable snmp in cisco devices.

Any one know that you default community string for Solrawinds ?

 

3 REPLIES

The command is snmp-server

The command is snmp-server community YourString RO  (or RW if you want read/write).

I would recommend not using any default community string on your devices.  I believe in SolarWinds you program a community string when you add the network device to it so you can pick what string you want to use.

 

New Member

community strings are version

community strings are version 2 which are clear text.  Version 3 offers encryption.  To enable traps on your cisco devices use snmp-server enable trap (doing so will enable all traps on your device)

 

 

 

New Member

snmp-server community

snmp-server community <community_name>
snmp-server ifindex persist
snmp-server trap-source <loopback>
snmp-server host <host_ip> version 2c <Community_Name>

67
Views
0
Helpful
3
Replies