Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Monitoring Voltage

Has anyone attempted to monitor voltage through a 1841 router? The IOS version

c1841-advsecurityk9-mz.124-11.T.bin. Through the MIB browser on cisco site it says it is supported but wondering if the equipment supports this function? I have the OID which could produce this as well.

- ciscoEnvMonVoltageStatusTable = 1.3.6.1.4.1.9.9.13.1.2

- ciscoEnvMonVoltageStatusEntry = 1.3.6.1.4.1.9.9.13.1.2.1

- ciscoEnvMonVoltageStatusValue = 1.3.6.1.4.1.9.9.13.1.2.1.3

Regards,

Matthew

5 REPLIES
Cisco Employee

Re: Monitoring Voltage

Voltage objects are not supported on the 1841 platform.

Community Member

Re: Monitoring Voltage

Is Temperature?

Cisco Employee

Re: Monitoring Voltage

No. It looks like the only environment monitoring supported by the 1841 is fan monitoring.

Community Member

Re: Monitoring Voltage

Thank you for the information, we have been looking everywhere for this..

Do you have a sample configuration for traps or RMON to activate if the fan goes out?

Do you have link to check on what other equipment supports voltage and temp?

Cisco Employee

Re: Monitoring Voltage

To enable Fan traps from the CISCO-ENVMON-MIB, just add:

snmp-server enable traps envmon

That will enable the ciscoEnvMonFanNotification notification. I do not know of a link that provides general ENVMON support for all devices.

185
Views
0
Helpful
5
Replies
CreatePlease to create content