cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1026
Views
0
Helpful
3
Replies

NAM and ASA

cnrs-dsi
Level 1
Level 1

Hello

We have a new NME-NAM-120S card with recent OS (5.1) and we want to collect netflow from ASA 5540.

We have all configured :

ASA send netflow. NAM receive the flow.

The NAM DATA SOURCE indicate  193.55.X.X    NETFLOW  Last packet received : Nov25 15:40

All seems to be ok.

When i filter on data source 193.55.X.X it says "no data for selected interval"

Any idea ?

2 Accepted Solutions

Accepted Solutions

Joe Clarke
Cisco Employee
Cisco Employee

The NAM does not support the NetFlow 9 records from the ASA.  This is documented in the release notes.

http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module_software/4.2/release/notes/nam42note.html#wp57518

View solution in original post

No.  The security-focused flows are not currently planned for support by the NAM.

View solution in original post

3 Replies 3

Joe Clarke
Cisco Employee
Cisco Employee

The NAM does not support the NetFlow 9 records from the ASA.  This is documented in the release notes.

http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module_software/4.2/release/notes/nam42note.html#wp57518

thanks a lot.

Is this indicated in future roadmap ?

No.  The security-focused flows are not currently planned for support by the NAM.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: