Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NAM Configurations

Hi All, below is the my network setup. I want to monitor the Real time video & IP phone conversation via NAM which are happening on my DS1 & DS2 & DS3. NAM is installed in DC switch which is connected to core switch as Layer 3 link & core is connected to all DS switches over L3 links..can any one tell how can I monitor traffic which is on DS switches.

DC-Switch-with NAM2

|L3

Core Switch 1

|L3

/L3 |L3 \L3

DS1 DS2 DS3

| | |

L2 Access Switches

1 REPLY
Cisco Employee

Re: NAM Configurations

Your diagram didn't make it through the HTML translation. However, if the switches are separated by layer 3 links, your only choices for seeing traffic flowing through the DS switches on the NAM in the DC code is to use Netflow export on the DS switches, or use VACLs. See http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module_software/4.0/switch/configuration/guide/getstart.html for more on configuring VACls and NDE.

110
Views
0
Helpful
1
Replies