cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
348
Views
0
Helpful
1
Replies

NAM Configurations

jain.nitin
Level 3
Level 3

Hi All, below is the my network setup. I want to monitor the Real time video & IP phone conversation via NAM which are happening on my DS1 & DS2 & DS3. NAM is installed in DC switch which is connected to core switch as Layer 3 link & core is connected to all DS switches over L3 links..can any one tell how can I monitor traffic which is on DS switches.

DC-Switch-with NAM2

|L3

Core Switch 1

|L3

/L3 |L3 \L3

DS1 DS2 DS3

| | |

L2 Access Switches

1 Reply 1

Joe Clarke
Cisco Employee
Cisco Employee

Your diagram didn't make it through the HTML translation. However, if the switches are separated by layer 3 links, your only choices for seeing traffic flowing through the DS switches on the NAM in the DC code is to use Netflow export on the DS switches, or use VACLs. See http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module_software/4.0/switch/configuration/guide/getstart.html for more on configuring VACls and NDE.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: