Hi all, We have two Cisco 6509s one of which has a NAM module installed. There is a SPAN session configured to monitor all traffic on the local 6509. How do I configure the NAM / switch to capture data from the other 6509?
From my knowledge NAM modules only capture traffic on the machine where they are installed, so there is no way to "pull" traffic from other machines, neither that machines can "push"traffic to NAM (e.g. like with Netflow).
But something can be done with RSPAN. On the remote machine you can configure RSPAN to mirror the traffic to the machine where NAM is installed and then it's possible to capture traffic with NAM.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...