Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

NAM + Waas integration results in pending for ever

Hello,

We tried to integrade WAAS v4.1.5(c), OE512 + Wave OE474  into a NAM appliance 2204 v4.1.(1) with the result that the Devices are pending for ever (since this morning) after learned from the flow exports. Does anybody has an idea how to get the WAAS data sources active?

Steffen

1 ACCEPTED SOLUTION

Accepted Solutions

Re: NAM + Waas integration results in pending for ever

Try adding the IP address as a Monitor Server and see if it changes from pending to active after adding the data sources.

1. Login into the NAM.

2. Click Setup ---> Data Sources

3. Choose WAAS ---> Monitored Servers

4. Click Add and enter the ip address.

Now try to add the data sources for the Setup ---> Data Sources ---> WAAS ---> Devices .

This is a known bug:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtf51695

2 REPLIES

Re: NAM + Waas integration results in pending for ever

Try adding the IP address as a Monitor Server and see if it changes from pending to active after adding the data sources.

1. Login into the NAM.

2. Click Setup ---> Data Sources

3. Choose WAAS ---> Monitored Servers

4. Click Add and enter the ip address.

Now try to add the data sources for the Setup ---> Data Sources ---> WAAS ---> Devices .

This is a known bug:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtf51695

New Member

Re: NAM + Waas integration results in pending for ever

Thx for your very good hint. Yes, now all WAAS Datasources are active, but no traffic will be shown for WAAS - still after some days.

We setup "DS=>WAAS monitored servers" and Setup=>monitoring=>all WAE DS as well. Do you have an idea?

368
Views
0
Helpful
2
Replies
CreatePlease to create content