Hi, I am running NAM2 & NAM2-250S in our 6500 chassis running sup720-3CXL w/ SXI4 code. I am confused by the captures I am pulling down, as there seems to be a ton of multiple packets. At first I thought this was caused by selecting "Both" under data source & "Both directions" under the actual capture session, but I have tried using one-way data sources combined with one-way capture sessions, but I still seem to be receiving duplicate packets. Any ideas?
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...