I've got LMS3.1 fully patched on Solaris 10 fully patched. I'm moving the NMS Server so I need to change the SNMP Community string and ACL on every device we have (1000 mix of IOS and CatOS over several platforms). Although I've never used Netconfig before it looks fairly straightforward. Which is what worries me. As I've had direct experience of someone distributing the same config to every router on the network before, my question is: Is there a process/checklist to follow "gotten by experience" please?
If the gist of your concern is about "someone distributing the same config to every router on the network" unintentionally or otherwise, that risk can be mitigated by setting up "Approvers" for NetConfig jobs at RME - Admin - Approval.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...