I want to plan deployment of NFC, I dont know how to estimate a performance of single NFC. Do You have any expirience how to consiger how much of flow can be handle by one serwer with Netflow Collection station.
The CPU, RAM, and disk space recommendations above are minimum requirements, the actual requirements are determined by your configuration and by the volume and uniqueness of NetFlow data that is received. Actual resource usage can vary greatly depending on these factors.
You can have a look into "Tuning Memory Usage" chapter of the manual at :
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...